Get a quote

Geyser Size Calculator

Find the right geyser size for your household, how long it takes to reheat and how much energy your hot water uses.

Row of new electric geysers in different sizes standing in a plumbing supplier warehouse

Too small a geyser runs cold halfway through the second shower; too large a one heats water you never use and loses heat all day. Enter how your household uses hot water and the calculator suggests a standard South African geyser size, the reheat time for the element you choose and the energy your hot water needs each day.

Geyser Size Calculator

min
A typical bath is about 80 litres.

Your result

Recommended size150 litres

Hot water used per day (stored at 60 °C)
219 L
Hot water needed in the busiest period
142 L
Full reheat time, 150 L with a 3 kW element
2.6 hours
Energy to heat a day's hot water
11.4 kWh

Sizes are the standard 50–300 litre geysers sold in South Africa. If two people often shower back to back, or you plan a solar or heat pump system, go one size up.

Geyser size guide

As a rough guide for a household with standard shower heads and showers of about seven minutes:

HouseholdTypical geyser
1 person, flat or cottage50–100 litres
2 people100–150 litres
3–4 people150–200 litres
5–6 people200–250 litres
6+ people or frequent baths250–300 litres, or two geysers

Long showers, rain shower heads and baths push the size up; water-saving shower heads bring it down. The calculator above lets you test each.

How the calculator works

It assumes water is stored at 60 °C, comes in cold at about 15 °C and is mixed to about 40 °C at the shower, so a little over half of each shower is hot water from the geyser. Each person also uses about 8 litres of hot water a day at basins and the kitchen sink. Because the element reheats between the morning and evening peaks, the geyser only has to hold the busiest period's hot water, which is about two thirds of the day's total.

Reheat time uses the energy needed to heat the full tank by 45 °C, divided by the element rating. In practice the element switches on as soon as hot water is drawn off, so the geyser rarely starts from cold.

When you replace a geyser

A geyser replacement must comply with SANS 10254, including a pressure control valve, vacuum breakers, a drip tray and an overflow pipe, and a PIRB-registered plumber must issue a Certificate of Compliance. If you change size, check that the roof space or ceiling can carry the extra weight: a full 200 litre geyser weighs well over 250 kg. See geyser installation for what to ask for in a quote.

Frequently asked questions

What size geyser does a family of four need?
Usually 150 or 200 litres. With water-saving shower heads and short showers a 150 litre geyser is enough; with long showers, a rain shower or daily baths, choose 200 litres.
Is a bigger geyser more expensive to run?
Heating the water you use costs the same whatever the tank size, but a bigger tank loses more heat through its walls every day. A geyser that is far too large for the household therefore costs a little more to run.

Get a free quote

Use the result in your quote request and a plumber or supplier in your area can price the job accurately. These services are related to this calculator:

More plumbing tools

Get a free quote