Get a quote

Water Leak Cost Calculator

Find out how much water and money a dripping tap, running toilet or hidden leak is costing you.

Close-up of a chrome tap dripping water into a white basin

A drip does not look like much, but it runs 24 hours a day and your municipality charges for the water and, in most metros, for sanitation on the same volume. Count the drips or catch the leak in a measuring jug for a minute, enter your tariff and see what the leak costs.

Water Leak Cost Calculator

Count for 15 seconds and multiply by 4.
mL/minCatch the leak in a measuring jug for one minute. Leave at 0 to use drips.
R/kLAdd the water and sanitation charges per kilolitre for your consumption block.

What the leak costs you

Cost per yearR 197

Water wasted per day
10.8 L
Water wasted per month
0.33 kL
Water wasted per year
3.9 kL (49 baths)
Cost per month
R 16

Stepped tariffs charge more per kilolitre the more you use, so a leak can push the whole household into a dearer block. A hot water leak also costs electricity to reheat the water.

How to find a leak before it finds you

  1. Meter test. Turn off every tap and appliance, write down the water meter reading (or photograph it) and check again after an hour or overnight. If it has moved, there is a leak.
  2. Toilet dye test. Put a few drops of food colouring in the cistern and do not flush. Colour in the bowl after 15 minutes means a worn flapper or a faulty fill valve.
  3. Geyser overflow. A geyser overflow pipe that drips constantly points to a faulty pressure valve or thermostat, which wastes hot water.
  4. Damp patches. Wet paving, unusually green grass, damp walls or a sound of running water at night suggest a hidden pipe leak.

Hidden leaks

Leaks under slabs, in walls or in underground supply pipes can waste thousands of litres a month without showing. If your meter test shows a leak but you cannot see it, a leak detection specialist can find it with acoustic and thermal equipment before any digging. Many municipalities will consider a rebate on a high bill if you can show the leak was repaired by a plumber, so keep the invoice.

Frequently asked questions

How much water does a dripping tap waste?
At about one drip a second a tap wastes around 20 litres a day, or about 8 kilolitres a year. A thin, steady stream from a tap or a running toilet cistern can waste ten times that or more.
Who pays for a leak on my property?
The property owner is responsible for pipes on their side of the water meter, and pays for the water lost through them. The municipality is responsible for the meter and the pipes before it.

Get a free quote

Use the result in your quote request and a plumber or supplier in your area can price the job accurately. These services are related to this calculator:

More plumbing tools

Get a free quote